How to Use a Transmission Jack Adaptor

To understand how to use a transmission jack adaptor, first, one has to understand why someone would need one.

Anyone, who’s ever tried to take out a transmission without the right equipment, understands just how hard and unsafe this job can be.

The shape and sheer weight of the components make manual removal dangerous, so the versatile jack tool could indeed make this job a lot easier and safer.

Even without the oil, the average transmission weighs at least 100 pounds. In addition, transmissions are notoriously hard to grab

They have weird dimensions, are often slippery, and have an unusual center of gravity, which is often too far from the area where can could attempt to grab it.

To remove it in a safe and efficient way, one needs a special kind of jack.

Traditional Jacks Weren’t Developed For That

The question how to use a transmission jack adaptor comes up because of the limits of traditional floor jacks.

These appliances are developed to provide stability, but they cannot deal with a moving part like a transmission, and not just because of the weight.

man fixing car brakes

Some jacks can hold hundred times the weight of a transmission.

The problem is fit and placement.

Transmissions have a weird shape, and don’t exactly fit a standard traditional jack, or at least not in a safe way. 

Nonetheless, to successfully complete transmission repair and maintenance, it needs to be taken out.

There are two ways to do that. The first one is buying a transmission jack.

Also Read: Should You Buy Or Rent A Transmission Jack?

The second one is using a traditional tool with a transmission jack adaptor.

Before one answers the how to use a transmission jack adaptor, first let’s discuss what these tools are.

Transmission Jacks And Transmission Jack Adaptors

Transmission jacks are used for the installation or removal of transmissions.

They were designed specifically for that purpose, and feature a jack along with an adjustable head.

Traditional jacks are very similar in their design, with one major exception, they lack the adjustable head specifically designed for transmission repair, removal, and maintenance.

To do the job properly, mechanics need to be equipped with a transmission jack adaptor.

What To Consider

Two major factors need to be considered are weight capacity and safety.

This is true for the jack and the adaptor as well.

If either of the two is poorly designed and cannot hold the weight of the transmission, safety is compromised.

Even if the adaptor is top quality, it cannot overcome the deficiencies of the jack.

It is only an extension of it, so any floor jacks must be of high quality, good materials and without design flaws.

Red transmission jack

Jacks with a wide base offer more stability, another factor to consider for a transmission device.

Any high-quality jack can lift a car safely and accurately provided they have the weight capacity for it.

One should only use jacks that were approved for that specific weight, and the same goes for the jack stands and the adaptor as well.

Air-assisted jacks are also a possibility, but hydraulic devices are generally more dependable.

Transmission Jack Basics

Transmissions are not just heavy, but they are very difficult to grab onto.

They were not designed for that, and therefore not many people lift them with their bare hands.

The transmission jack allows for effortless removal in mere minutes.

A good adaptor can convert most traditional jacks, offering versatility and convenience.

They are strong enough to hold not just the transmission, but also tanks, bumpers and different car parts that are heavy and awkward to handle.

The best adaptors have a modular design for increased adaptability for assembly and configuration. These types of jack adaptors that can handle just about anything, and are essential tools for mechanics and even amateur car enthusiasts.

Learning How To Use A Transmission Jack Adaptor

It depends on the tool’s versatility. The best transmission jack adaptors turn any hydraulic jack into a transmission one.

The head has to be compatible with the base of the jack, and even with scissor designs, there is a workable solution.

Woman on red mechanical creeper

Some jacks come with a strap that can hold the transmission in place, allowing the user to use designs that are not 100% compatible.

The plate still needs to have enough space for the transmission itself, but the strap allows a little more room for error and some extra safety.

Floor jacks with a removable saddle are all compatible with a wide variety of adaptors, as long as the insert hole suits the design.

Once the adaptor is on, the rest of the job isn’t very different from the usual jack work, it is all about precision, safety, and timing.

Check out: Learn how to use a tire sizing calculator

Using the Transmission Jack 

Anyone can learn how to do this once everything is in place. When the jack is assembled, the rest is about proper use and care. 

The first rule is making sure that the transmission’s center of gravity lines up with the plate.

Transmissions are awkward that way, they could have their center of gravity at the sides, front, or rear.

Wherever it is, it must align with the center of the jacks, otherwise one risks injury to themselves or damage to the transmission.

When it sits perfectly well and is absolutely stable, the strap may not be necessary, the hooks can handle it just fine.

Arcan ALJ3T Aluminum Floor Jack - 3 Ton Capacity

If any additional adjustment is needed, the levers come into play. Using them, one can position the transmission in any way required.

Once the transmission is in an ideal position, it’s time to carefully lower the jack plate while keeping the transmission tight and secure.

Don't miss out: Best torque wrenches reviews

Summary 

Learning how to use a transmission jack adaptor comes down to the basics. Quality, versatility, and safety of equipment trump over any other considerations.

The great thing about transmission jack adaptors is their versatility.

They fit just about any traditional jack designs and can turn them into transmission jacks.

If the adaptor head is compatible, it can be attached to the base effortlessly.

Transmission jacks are often pricey, and considering that most people seldom need them, opting for an adaptor makes more sense.

>