2 X Scissor Jack
2 X Handle
Net weight: 2.1KG
Item Size: 35*8.5*8.5 CM
Minimum height: about 85MM
Maximum height: approximately 385MM
The scissor jack, with tooth gears, can extend from 85 mm(close position) to 385mm, more than enough to lift most vehicles.
Easy to operate using the chromed crank with speed handle.
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
Care and Maintenance:
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
Make sure this fits by entering your model number.
Size: Item size 35*8.5*8.5CM(≈13*3.1*3.1″). Net Weight 2.1KG(4.6lb). Max extension height 385MM(15.2″).
Heavy Duty: 2 Ton (4,400 lb) capacity, can level your car easily. Widely used for smaller and medium vehicles such as SUV, Van and Mini Bus.
Quality: Made of high quality steel with wide bottom, leveling your Car/Trailer, Remains steady on level surface.
Lightweight: The scissor jack is only 2.1KG. It’s easy for you to store in your car and carry it anywhere.
Good Service: We offer a 2 year warranty. If you have any question, pls feel free to contact us directly via Amazon and we’ll resolve your problem within 24 hours!